ABB Advant Controller 31 Analog I/O Card Failure

ABB Advant Controller 31 Analog I/O 07AC91 Card

ABB Advant Controller 31 Analog I/O Card failure and effect all the Generator System. Currently problem solved by replace the faulty module 07AC91 and unit returned back in good condition.

Accu-Gage 11" Dial Tire Pressure Gauges

Accu-Gage 11" Dial Tire Pressure Gauge

• Flexible 11” hose between gauge and chuck for hard-to-reach tire valves
• Dual range scales with psi and kPa or kg/cm are available
• Polished brass bezel, stem and pressure release valve assembly
• holds pressure reading until released
• Push button valve bleeds air to desired pressure
• 0-60 psi range

Bike Tyre Pressure Gauge

Bike Tyre Pressure Gauge

This unique pressure gauge used Digital Valve Cap - a cap with a digital readout of the current tire pressure. It’s powered by a small cell battery and activated when you press the cap.

Turbine Drain Sump Pit - Upgrading Level Probe Switch to Ultrasonic Switch Type

Project in Progress - Turbine Drain Sump Pit - Upgrading Level Probe Switch to Ultrasonic Switch Type

The previous level probe switch always giving fault signal and disturbs controlling of the water level in the system. The new type of Ultrasonic Model non-contact which expected to be more robust and reliable.

Specifications:

FDU91F-RN1A* PROSONIC S
FMU90-R11CA131AA1A* PROSONIC S
RSG30-A1A1AAA1* ECOGRAGH T

Now it is almost complete.

PPC4 Pressure controller/calibrator

DH Instruments, a Fluke company announce the PPC4 Pressure controller/calibrator; a high performance instrument designed to provide versatility and ease of use in calibration labs and manufacturing environments. The PPC4 covers the absolute range of 1 kPa (0.15 psi) to 10 MPa (1500 psi) and gauge equivalent including very low differential pressures. PPC4’s emphasis is on high end performance, minimizing measurement uncertainty and maximizing the ranges covered by a single controller.

PPC4 Pressure controller/calibrator

Introducing:

• Choice of new advanced local user interface with color display and point-and click navigation or economical basic interface
• Front panel USB port with free “cockpit” software for instantaneous plug-and-play functionality with any PC
• Real time measurement uncertainty calculation and display
• New “F class” Q-RPT module for full scale performance at lower cost

WIKA Liquid Filled Pressure Gauge 0-160 PSI 213.53

WIKA Pressure Gauge 0 to 160 PSI

The specifications are as below:

Pressure Gauge Range: 0-160 PSI/Bar dual scale
Size: 2" (50mm)
Connection: 1/4" NPT center back mount
Accuracy: +/- 2/1/2% of span
Wetted Parts: Copper Alloy
Case: 304 Stainless Steel
Window: Polycarbonate, Buna-N gasket
Case-to-Socket: Viton O-ring
Dial: White ABS plastic
Pointer: Black aluminum
Dial Layout: Numbers every 20 PSI, tick marks every 2 PSI
Media Temperature: 140º F maximum
Ambient Temperature: -4º F to 140º F

Ross Liquid Filled Pressure Gauge 0-7 kg/cm2 ~ 100psi

Ross Liquid Filled Pressure Gauge 0-7 kg/cm2 ~ 100psi

Specifications:

Pressure Gauge
Manufacturer Ross
Range: 0-7 kg/cm2 ~ 100psi
Liquid Filled
Dial Gauge: 63mm
Direct Bottom Mounting

Fisher Control Valve Type 585C Servicing

Fisher Control Valve Type 585C Servicing

Fisher Air Filter Regulator

Today, Fisher Control Valve vendor doing their valve servicing at our power plant.

Wika Pressure Gauge At Hydrogen Pressure Control Valve

WIKA Pressure Gauge 0-60bars and 0-15bars
Used At The Hydrogen Pressure Control Valve

Kelco F25-B Series Corrosive Flow Switch

Kelco F25-B Series Corrosive Flow Switch

This is a new flow switch that we found at market and currently installed at our electrolyser ECP Stream. Alternative to Flotech ECP Flow Switch which give a lot of problems recently.

Anyway, just for your information this kind of switch already used 3 months and the result is very good and no defect from operation at all so far. If this F25-B Series Corrosive Flow Switch can be long lasting live, I would consider this one to replace the old Flotech brand flow switch. At least maybe 1 year... mmmm... what do you think?

Kelco F25-B Series Corrosive Flow Switch at Pipe

Full Specifications are as follow:

F25 SERIES CORROSIVE
RESISTANT FLOW SWITCH
BRAND : KELCO, MODEL : F25-B
DRY RED SWITCH, 240V AC 200V DC 1A

Anyone has use this product before? Please shares here. Thanks...

Hydrogen Sensor - RKI Instrument

RKI Instrument Hydrogen Sensor

Features

• Explosion proof housing and sensor design
• H2 specific solid state sensor for 0 - 2000 ppm
• H2 specific catalytic sensor for 0 - 100%LEL
• Molecular sieve filter built in; highly specific to H2
• Eliminates false alarms from IPA and other gases
• 4-20 mA transmitter, 24VDC

Applications

• Semiconductor
• Power Plants
• Fuel Cell Industry
• R & D applications
• Gas plants

This one only another options if the current Crowcon Hydrogen Monitoring System unreliable anymore.

More details you can visit RKI Instrument website.

WEKA Visual Level Indicator VLI

WEKA Visual Level Indicator VLI

WEKA Visual Level Indicator VLI

WEKA Visual Level Indicator VLI operating principle is based on the use of a permanent bar magnet system which ensures the safe and reliable activation of visual indication elements (flags), swithes, and transmitters, even when used on thick-wall high pressure indicator pipe.

This is what we have in our power plant which currently need to be replaced because of the britles. Then we have to upgrade the better specification instead of the old specification.

More details you can visit this WEKA website.

Crowcon Hydrogen Leakage Detector Monitoring System - Flamgard Exe

Crowcon Hydrogen Sensor - 96HD

Crowcon Hydrogen Panel Rack

Crowcon Hydrogen Panel Display

Crowcon Hydrogen Panel (Back)

Hydrogen is highly explosive gas. All of the 7 Hydrogen detectors in our Electro Chlorination Plant (ECP) are using Crowcon Hydrogen monitoring system.

A situation lead to an extremely dangerous explosive condition if one of the ECP streams were to develop a leak and Hydrogen concentration in the building reached above the Lower Explosive Limit (LEL).

Recommended Action when the alarm appeared:

1. Troubleshoot the reason why the detectors give an alarm. If the detectors are functioning correctly, there should not be any spurious alarms. There would not normally be Hydrogen present in sufficient quantities.
2. Zero the detectors using compressed air and calibrate using a suitable Hydrogen calibration gas.
3. Uninhibit the Hydrogen detection input channels and restore the system to normal operation.

Anyone that using this system facing some problems? Is this equipment Crowcon very reliable at your plant? Post and share here.

Endress+Hauser Electromagnetic Flowmeter Promag 53 Project Update

Promag 53 Transmitter

Promag 53 Recorder and Transmitter

Promag 53 Transmitter Sensor Location

Promag 53 Sensor at the ECP Pipe

Promag 53 Recorder

Yesterday I post about the Endress+Hauser Electromagnetic Flowmeter Promag 53 Project. Now the project still in testing for around 2 weeks. If this success, we will try to install this new model to our Electro Chlorination Plant.

Endress+Hauser Electromagnetic Flowmeter Promag 53

Endress+Hauser Electromagnetic Flowmeter Promag 53

This is a new electromagnetic flowmeter delivered yesterday by Endress+Hauser personal and will be installed at the electrolyser chlorination plant pipe for flow measurement. The consequences of flow switch failure frequently and repeated recently at this electrolyser pipe which cause the Electro Chlorination Plant trip.

This situasion leads to several trial units of many brands to avoid this happen and happen again. Anyway, this one also a trial unit and if the result success will be considered.

Promag 53 Specifications

In this post, I just describe the general information of this product. Later on will include details. So make sure you will not miss my post.

PIKOM PC Fair August 2008

14 - 16 August 2008 11:00 am - 9:00 pm	KB Mall, Kota Bharu, Kelantan Jalan Hamzah, 15050 Kota Bharu Pusat Dagangan Terengganu, Kuala Terengganu, Terengganu Padang Hiliran, 21100 Kuala Terengganu Star Parade, Alor Star, Kedah Jalan Teluk Wanjah, 05200 Alor Star
15 - 17 August 2008 11:00 am - 9:00 pm	Berjaya Megamall, Kuantan, Pahang Jalan Tun Ismail, Sri Dagangan, 25000 Kuantan

Vegapuls 62 Radar Level Trasmitter - Warranty Claim Done

Vegapuls 62 Radar Level Trasmitter

3 months delivered after send to Vega for warranty claim. This time is different cause from the previous one. Ready to install by today.


Related articles:

- Bandscreen Vega Radar Type Trending
- New Type of Bandscreen Level Transmitter

CCI Sulzer Valve and Drag Control Valve

Description: PV6
CCI Part Number: 103.215.282.001
Valve Serial Number: Valve Control

Description: Seal Set PV6
CCI Part Number: 000.101.000.783
Valve Serial Number: Valve Control

Description: SSB10-24VDC
CCI Part Number: 103.203.368.210
Valve Serial Number: Safety Unit

Description: SSB10-24VDC
CCI Part Number: 103.203.368.210
Valve Serial Number: Safety Unit

Description: Seal Set SSB10-24VDC
CCI Part Number: 103.203.368.290
Valve Serial Number: Safety Unit

Feedback Unit Complete R-SG15-4K
CCI Part Number: 103.225.224.2
Valve Serial Number: Feedback Unit

For all items above from CCI Sulzer Valve and Drag Control Valve need to reorder.

Conductivity Analyser at the Condenser Hotwell

ABB Conductivity Analyser Transmitter

This photo showing the Transmitter of Conductivity Analyser at the Condenser Hotwell. Conductivity purpose at the Condenser Hotwell are as below:

• It is the cheapest and the most reliable type of analyzer which serve many function

• To detect seawater ingress. Water conductivity will increase if there is seawater ingress.

• To monitor condensate and feed water quality. Water conductivity will increase with the overdosing of ammonia or hydrazine.

Related post:
Conductivity Analyser High Alarm Operated at the Generator Panel

Bourdon Haenni 0-6 Bar Pressure Gauge

Pressure Gauge
Manufacturer: Bourdon Haenni
Part Number: EN 837-1
Type: Lower Direct Mounting
Range: 0-6 Bar
Dial gauge: 100mm
Connection: 1/4" NPT

Sample Convertion of Pressure

Sample Convertion of Pressure

Example reading: 1 Pa = 1 N/m² = 10⁻⁵ bar = 10.197×10⁻⁶ at = 9.8692×10⁻⁶ atm, etc.

Temperature Gauge Definition

What is temperature gauge? Temperature gauge is a device that indicate or measure temperature to be monitored. Have you seen it before. Here I enclosed for you the temperature gauge photo.

Sample of Temperature Gauge

Turbine Jurnal Bearing Thermocouple

Turbine Thermocouple (Sensor)

Turbine Thermocouple (Socket)

Turbine Thermocouple (Overall)

1) Thermocouple for turbine journal bearing:

Model: T22
Type: T Duplex
Length: 1000mm
Accessories: Male and female connector, mounting spring and pin connector
Quantity: 10 pieces

2) Thermocouple for turbine thrust bearing:

Model: T22
Type: T Duplex
Length: 400mm
Accessories: Male and female connector, mounting spring and pin connector
Quantity: 10 pieces

Pressure Gauge Definition

What is pressure gauge? Pressure gauge is an instrument to measure pressure. Have you seen it before? Below is the photo of pressure gauge for those who never see it.

Photo: Pressure Gauge

The photo above just showing one of the applications of pressure gauge in industry which widely used in most industries such as power generation, factory, safety, food industry, oil and gas, and many more.