Non contact handheld infrared thermometer
Non contact handheld infrared thermometer $30
 | Handheld for device configuration |
| Wireless Communication via Bluetooth™ or WLAN based on an Industrial PDA |
| Device Xpert - Configuration software package for field device commissioning, diagnosis and maintenance |
| Envelop Curve for Endress + Hauser Time of Flight (ToF) level device |
| Flexible Architecture with Windows Mobile operating system |
| Investment Protection with easy future integration of WirelessHART, Foundation Fieldbus and Profibus protocol |
Field Xpert SFX100
Field Xpert is a compact, flexible, ergonomic and robust industrial PDA adapted to your needs for high productivity.
The Field Xpert package comprises:
Field Xpert offers functions to reduce your instrument setup and diagnosis time. It operates with HART®/Bluetooth™ modem and WLAN supported networks.
Device Xpert configuration software makes Field Xpert the complete HART® communicator for industrial applications.
Flexible architecture
The Windows Mobile™ operating system makes it possible to install further software applications for Plant Asset Management activities such as maintenance and documentation.
The Endress+Hauser software packages of the Xpert series run well on Field Xpert. This makes Field Xpert a real all-rounder for tough industrial applications.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
More details can be accessed at this resource.
What is a Doppler Ultrasonic Flow Meter?
An ultrasonic flowmeter (non-intrusive Doppler flow meters) is a volumetric flow meter which requires particulates or bubbles in the flow. Ultrasonic flowmeters are ideal for wastewater applications or any dirty liquid which is conductive or water based. Ultrasonics flowmeters will generally not work with distilled water or drinking water. Aerations would be required in the clean liquid applications. Ultrasonic flowmeters are also ideal for applications where low pressure drop, chemical compatibility, and low maintenance are required.
PRINCIPLE OF OPERATION
The basic principle of operation employs the frequency shift (Doppler Effect) of an ultrasonic signal when it is reflected by suspended particles or gas bubbles (discontinuities) in motion. This metering technique utilizes the physical phenomenon of a sound wave that changes frequency when it is reflected by moving discontinuities in a flowing liquid. Ultrasonic sound is transmitted into a pipe with flowing liquids, and the discontinuities reflect the ultrasonic wave with a slightly different frequency that is directly proportional to the rate of flow of the liquid (Figure 1). Current technology requires that the liquid contain at least 100 parts per million (PPM) of 100 micron or larger suspended particles or bubbles.
ULTRASONIC DOPPLER FLOW METER SELECTION
The key questions which need to be answered before selecting an ultrasonic flow meter or doppler flowmeter are:
Does the liquid have particulates of 100 ppm of 100 microns in size? Do you require a handheld or continuous process monitor? Do you require an analog output? What is the minimum and maximum flow rate for the flow meter? What is the minimum and maximum process temperature? What is the minimum and maximum process pressure? What is the size of the pipe? Is the pipe always full?
DESIGN VARIATIONS
Clamp-on ultrasonic flow meters come in either single or dual-sensor versions. In the single-sensor version, the transmit and receive crystals are potted into the same sensor body, which is clamped onto a single point of the pipe surface (Figure 4-8). A coupling compound is used ultrasonically connect the sensor to the pipe. In the dual sensor version, the transmit crystal is in one sensor body, while the receive crystal is in another. Clamp-on Doppler flowmeters are subject to interference from the pipe wall itself, as well as from any air space between the sensor and the wall. If the pipe wall is made of stainless steel, it might conduct the transmit signal far enough so that the returning echo will be shifted enough to interfere with the reading. There are also built-in acoustic discontinuities in copper, concrete-lined, plastic-lined, and fiberglass-reinforced pipes. These are significant enough to either completely scatter the transmitted signal or attenuate the return signal. This dramatically decreases flowmeter accuracy (to within only ±20%), and, in most cases, clamp-on meters will not work at all if the pipe is lined.
More details you can go to the website (http://omega.com).
Fluke 99B
PPC4 Pressure controller/calibratorIntroducing:
pH Indicator Paper Macherey Nagel
Fieldbus HART 375 Field Communicator"The 375 Field Communicator is the new standard in handheld communicators. Built on over 12 years of experience with the 275 HART® Communicator, user requirements drove the features of this next generation communicator. HART users worldwide told us how to make a better communicator. FOUNDATION fieldbus users said they wanted a portable intrinsically safe communicator that supports all their fieldbus devices.We designed the 375 Field Communicator user interface around the 275, leveraging the navigation features users told us they liked. Then we added FOUNDATION fieldbus and powerful features including a much larger touch screen, HART Revision 6 support, and the ability to upgrade your 375 Field Communicator onsite using the Internet. The result is the universal, user upgradeable, intrinsically safe, rugged and reliable 375 Field Communicator."
Hydroponic Deep Water System 
Hydroponic pH Meter
"Introducing the world’s first fieldbus calibrator
The MC5 Fieldbus Calibrator is a combination of a multifunction calibrator and a fieldbus configurator. The MC5 is a compact, easy-to-use and field compatible calibration solution that offers a lot of functionality. The fieldbus functionality of MC5 includes reading the digital output of the fieldbus transmitter, changing the configurations of transmitters and transmitter trimming. Calibrating fieldbus transmitters with the MC5 requires only one person and the calibration results are automatically documented.
Main features:
• Calibrate Foundation Fieldbus H1 or Profibus PA transmitters
The photo that you see above is a common color that available in the market. But have you seen the pink color of Beamex MC5 Calibrator before?"
• The MC5 is a calibrator and a fieldbus configurator in one unit
• The MC5 makes traceable calibrations
• Calibration results are automatically documented in the MC5
• A compact, easy-to-use and field compatible calibration solution
• The MC5 Fieldbus Calibrator can be used for various other calibrations as well
I am sure you never see this color before. But I am not sure whether this fancy color is in the market or not. Try to contact your supplier to know more about this. Mmmm...
